Jun 162018

Getting pretty annoyed with keeping track of which browser on which machine has which add blockers installed, so it’s time for a more holistic approach. Enter, stage left, the Pi-hole. In short it:

…acts as a forwarding DNS server, which means if it doesn’t know where a domain is, it has to forward your query to another server that does. When you install Pi-hole, it knows where the ad-serving domains are (because you tell it), so it doesn’t forward those requests.

With a Rapsberry Pi 3 model b and a 64GB micro SD card, a set-up that is beefier than it needs to be, but who knows what the Pi will be used for in the future…

#1 Get Raspbian, and format micro SD card— after much jiggling with the unlock tab on the adapter and delicately repeatedly inserting-half-inserting into 2012 Macbook Pro’s gunked-up card reader port…

$ wget http://director.downloads.raspberrypi.org/raspbian/images/raspbian-2018-04-19/2018-04-18-raspbian-stretch.zip

$ unzip -a 2018-04-18-raspbian-stretch.zip

$ diskutil list
/dev/disk3 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *62.0 GB    disk3
   1:               Windows_NTFS                         62.0 GB    disk3s1

$ sudo diskutil eraseDisk FAT32 RASPBIAN MBRFormat /dev/disk3
Finished erase on disk3

$ df -h
/dev/disk3s1    62Gi  1.5Mi   62Gi     1%       0                   0  100%   /Volumes/RASPBIAN

$ sudo diskutil unmount /dev/disk3s1
Volume RASPBIAN on disk3s1 unmounted

$ sudo dd if=/Users/yearluk/Downloads/2018-04-18-raspbian-stretch.img of=/dev/disk3 bs=4m

#2 First boot on the Pi, change hostname, and run the installer…

$ sudo apt update
$ sudo apt upgrade
$ sudo nano /etc/hostname
$ curl -sSL https://install.pi-hole.net | bash

#3 Select eth0 as the interface, and (Cloudflare) and (Google) as the upstream DNS providers.

Default Gateway:

Log queries and select web-gui option.

admin password xxxxxxx

install log at /etc/pihole/install.log

web gui

As easy as Pi 🙂

Set up SSH and VNC access (just a couple of checkboxes in Raspberian’s GUI), enable wi-fi (DCHP–

Expand blacklists…

curl -s https://tspprs.com/dl/fraud | pihole -g
curl -s https://tspprs.com/dl/ads | pihole -g
curl -s https://tspprs.com/dl/spam | pihole -g
curl -s https://tspprs.com/dl/scam | pihole -g
curl -s https://tspprs.com/dl/ransomware | pihole -g
curl -s https://tspprs.com/dl/phishing | pihole -g
curl -s https://tspprs.com/dl/tracking | pihole -g

Unbound and setting up resolving/recursive DNS (rather than merely forwarding)

What’s the difference? With forwarding, if a name has not been previously associated with an IP (ie. ached on the pi-hole), the request is sent upstream and the result cahed.

Aaand in recursive… request is sent to ROOT servers for resolving say, “.us”, and thence to TLD name servers. Domain lookup will go to AUTHORATATIVE servers handling “yearl” (and subdomains), and all will be relayed and chached locally. So, a few more steps? Why do this? Neither Cloudflare nor Google (or whatever my upstream DNS would have been) will know where I am going. So, err privacy. Why not do this? It will take longer for the first resolution of a name.

Install the recursive DNS resolver:

sudo apt install unbound

Update list of primary root servers:

wget -O root.hints https://www.internic.net/domain/named.root
sudo mv root.hints /var/lib/unbound/

Configure unbound:

sudo nano /etc/unbound/unbound.conf.d/pi-hole.conf
    verbosity: 1
    port: 5353
    do-ip4: yes
    do-udp: yes
    do-tcp: yes

<h1>May be set to yes if you have IPv6 connectivity</h1>

<pre><code>do-ip6: no

# Use this only when you downloaded the list of primary root servers!
root-hints: "/var/lib/unbound/root.hints"

# Trust glue only if it is within the servers authority
harden-glue: yes

# Require DNSSEC data for trust-anchored zones, if such data is absent, the zone becomes BOGUS
harden-dnssec-stripped: yes

# Don't use Capitalization randomization as it known to cause DNSSEC issues sometimes
# see https://discourse.pi-hole.net/t/unbound-stubby-or-dnscrypt-proxy/9378 for further details
use-caps-for-id: no

# Reduce EDNS reassembly buffer size.
# Suggested by the unbound man page to reduce fragmentation reassembly problems
edns-buffer-size: 1472

# TTL bounds for cache
cache-min-ttl: 3600
cache-max-ttl: 86400

# Perform prefetching of close to expired message cache entries
# This only applies to domains that have been frequently queried
prefetch: yes

# One thread should be sufficient, can be increased on beefy machines
num-threads: 1

# Ensure kernel buffer is large enough to not loose messages in traffic spikes
so-rcvbuf: 1m

# Ensure privacy of local IP ranges

And start unbound and validate:

sudo service unbound start
dig yearl.us @ -p 5353
; &lt;&lt;>> DiG 9.10.3-P4-Raspbian &lt;&lt;>> yearl.us @ -p 5353
;; global options: +cmd
;; Got answer:
;; ->>HEADER&lt;&lt;- opcode: QUERY, status: NOERROR, id: 26331
;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 1

; EDNS: version: 0, flags:; udp: 1472
;yearl.us.          IN  A

yearl.us.       3585    IN  A
yearl.us.       3585    IN  A

dig sigok.verteiltesysteme.net @ -p 5353

And then set custom upstram DNS in the pi-hole webgui to “”

Some basic Pi (Debian Stretch base) stuff…

Basic Pi config:

$ sudo raspi-config

Move over, ifconfig!

$ hostname -I

$ ip -4 addr show | grep global
    inet brd scope global eth0
    inet brd scope global wlan0

$ cat /etc/resolv.conf
# Generated by resolvconf

What’re my interfaces default gateways?

$ ip route | grep default | awk '{print $3}'

Can configure a static IP via /etc/network/interfaces or /etc/dhcpcd.conf Might do this when moving the Pi from the subnet to the router “guarding”

$ sudo route add default gw eth0
$ sudo /etc/init.d/networking restart

EDIT (2018-06-19): Pi-hole was running quite nicely over wi-fi (assigned to, went to put it on the LAN and after removing SD card to placement of the Pi board inso some case the SD card decided to go fuck up. Anyhoo repeated above steps with a new (32GB) SD card, and all appears to be peachy-creamy.